Everything you need to rebuild the rear wheel on a Warp 9 cush drive hub: the hub bearings, seal, distance tube and wheel spacers, plus the bearings for the cush drive sprocket carrier. Choose Spoked for a Warp 9 spoked wheel or Forged Tubeless for a Warp 9 forged tubeless wheel, since the forged hub uses its own kit.
Axle: 20mm
Hub bearings: 2 x 6205DU (52 x 25mm)
Hub seal: 1 x 32-52-7, plus C-clip
Distance tube: included
Carrier bearings: 2 x 6005 (47 x 25mm)
Spacers: #42 rotor side, #43 sprocket side, #44 inside
Forged tubeless kit (BK-106R(SC)-C20): rotor side bearing 1 x 6005 (47 x 25mm), rotor side seal 1 x 32-47-7, distance tube 99.5mm. Everything else is the same as the spoked kit.
Warp 9 wheels only: this kit fits Warp 9 115R cush drive hubs with a 20mm axle, not OEM hubs. 22mm and 25mm axle bikes have their own kits.
Fits:
KTM EXC 125 / 200: 1990-2016
KTM EXC 150: 2020-2023
KTM EXC 250 / 300 (incl. Six Days): 1990-2023
KTM EXC 400: 1990-2007
KTM EXC 520: 2000-2002
KTM EXC-F 350 (incl. Six Days, Erzbergrodeo): 2012-2023
KTM EXC-F 450 (incl. Six Days): 2003-2023
KTM SX 125 / 250: 1990-2012
KTM SX 150: 2009-2012
KTM SX-F 250: 2005-2012
KTM SX-F 350: 2011-2012
KTM SX-F 450: 2003-2012
KTM XC 125: 2008-2012
KTM XC 150: 2010-2012
KTM XC 250 / 300: 2006-2012
KTM XC-F 250: 2007-2012
KTM XC-F 350: 2012
KTM XC-F 450: 2008-2012
KTM XC-W 150: 2020-2023
KTM XC-W 250 / 300: 2006-2023
!
You can still order it now — it’s expected to ship in about .