Copy link
QS8 power harness for Surron Light Bee — main view
QS8 power harness for Surron Light Bee — connector detail
QS8 power harness for Surron Light Bee — ring terminal detail
Click to open expanded view

Surron Light Bee QS8 Power Harness

$79.99
Taxes and shipping calculated at checkout
QS8 power harness for Surron Light Bee — main view

Stock Notification

Get notified when this product is available again

Product information

Upgraded QS8 power harness for the Surron Light Bee — made to run an aftermarket battery with a QS8 connector and bypass the stock Surron breaker.

Features

  • Allows use of an aftermarket battery with a QS8 connector
  • 7 AWG wire
  • Bypasses the stock Surron breaker
  • Works with all upgraded controllers (not meant for stock controllers)
  • Always double check your wires match the power harness before connecting to the battery or controller

Fitment

  • Surron Light Bee with upgraded controller (e.g. EBMX X-9000)

Installation notes: The power harness comes pre-soldered with a QS8 male connector & a 2-pin male connector for the 12V voltage converter. The other end has 2 ring terminal connectors with M6 holes to bolt to your aftermarket controller.

How to use: Plug the connector halfway into the battery, wait 5 seconds, then push all the way together. This prevents arcing/sparking that could harm your controller. The QS8 connector has built-in anti-spark, but it's best to use this method anyway.

DISCLAIMER: ALWAYS DOUBLE CHECK YOUR CONNECTIONS WITH A VOLT METER TO CONFIRM CORRECT WIRING BEFORE CONNECTING ANYTHING TO LIVE POWER!!

Ships from USA!