Surron Foot Brake Master Cylinder YZ250

The YZ250F-spec master cylinder is a proven upgrade for your Surron Light Bee foot brake setup. It delivers stronger, more consistent pedal feel than the stock unit and drops in without drama.

Features

• Stronger stopping power vs stock HSK master cylinder
• Direct bolt-on fit for our Surron Light Bee foot brake and common foot brake kits
• Type: YZ250F foot brake master cylinder
• Materials: OEM grade cast aluminum body, stainless steel piston
• A stronger master means firmer pedal feel and more consistent braking — a simple parts swap that improves control right away

Includes

• One upgraded master cylinder ready to mount to your existing foot brake kit, plus the needed hardware

Fitment

• Our Surron Light Bee, Talaria MX3/MX4, and E-Ride Pro SS foot brake kits

Note: MUST BE USED WITH OUR FOOT BRAKE — other brands may require modifications to fit.

Install: Easy, 15–30 minutes. Tools: 8 and 10mm sockets, open end wrench, Allen keys, needle nose pliers, DOT 4 fluid, rags. 1) Put the bike on a stand and clean around the master and line. 2) Remove the pedal clevis pin and unbolt the stock master from the mount. 3) Move the brake line to the new master and bolt the new unit in place. 4) Reattach the clevis, top off with DOT 4, and bleed the rear circuit until firm. Bed in the brake with a few slow-to-fast stops to seat the pads. Tighten banjo bolts and mounting hardware to manufacturer spec. Do not ride until the pedal is firm and the system shows no leaks.

Ships from USA!