Copy link
GritShift Heavy Hitter V2 7075 billet skid plate for Sur-Ron and Segway, full view
Heavy Hitter V2 skid plate showing 10mm replaceable bash plate underside
Billet aluminum skid plate side rails engineered to withstand 6,000 lb impact
Ventilation slats on Heavy Hitter V2 skid plate to keep the Sur-Ron motor cool
Extended tail section of the V2 skid plate protecting against perpendicular strikes
Heavy Hitter V2 skid plate mounted on a Sur-Ron Light Bee LBX
Red anodized GritShift Heavy Hitter V2 skid plate color option
Gold anodized Heavy Hitter V2 billet skid plate for Sur-Ron
Silver Heavy Hitter V2 skid plate showing CNC-machined detail
Black Heavy Hitter V2 billet skid plate for Segway X160 and X260
Purple anodized Heavy Hitter V2 skid plate color variant
Blue Heavy Hitter V2 billet aluminum skid plate for Sur-Ron and Segway
Heavy Hitter V2 skid plate hardware and T20 Torx mounting bolts
Removable sections of the Heavy Hitter V2 skid plate for routine maintenance
Heavy Hitter V2 skid plate protecting controller and phase wires on a Sur-Ron
Heavy Hitter V2 skid plate fitment around the motor on a Sur-Ron Light Bee
GritShift Heavy Hitter V2 skid plate installed on an enduro Sur-Ron build
Click to open expanded view

Heavy Hitter Surron V2 Skid Plate

$199.99
Taxes and shipping calculated at checkout

Color: Red

Product information

Lifetime Warranty (side rails): GritShift states that it will replace the side rails for free if they bend (not applicable to bash plates — replacements available on request).

Heavy Hitter redesigned your favorite skid plate to fit all motors, re-optimized the bash plate angles for enduro, and tightened fitment around all controllers to protect your phase wires from sticks and rocks. At 3.4 lb, the V2 also adds rigidity to your frame. Where plastic skid plates flex into your motor — risking broken motor mounts and cases — the V2's 7075 T6 billet side supports and replaceable bash plate withstand 6,000 lb of impact force. During TKO hard enduro training, the aluminum plates actually slid over rocks and logs more easily than plastic, since sharp edges can't embed into the surface and create drag.

Features

  • Weight: 3.42 lb
  • 7075 T6 billet aluminum with 10mm bash plate, tested beyond 6,000 lb of force
  • Strategic ventilation slats keep your motor cool
  • Extended tail section protects against perpendicular strikes
  • Each section easily removable for routine maintenance
  • Bash plate replaceable in minutes

Manufacturer-listed fitment

Bike / setup Fitment
Surron LBX / S Listed by GritShift for this product.
Segway X160 / X260 Listed by GritShift for this product.

Check your configuration: V2 Surron version. Check clearance if your motor, controller or frame has been modified.

Fitment source: GritShift product fitment. Checked September 22, 2026. Manufacturer-listed compatibility; not a Modded Moto Co installation test.

This is the known, tested compatibility. Factory variations, dealer options, and aftermarket modifications can affect fitment — verify before purchasing.

Installation

Use blue medium thread locker on all hardware. Mounting bolts are T20 Torx; recommended torque 2.6 Nm / 23 in-lb — barely hand-tight, but with thread locker correctly applied it holds securely and stays removable. Tech sheet with assembly and torque specs available for download.