Heavy Hitter E-Ride Skid Plate

Meet the last skid plate your bike will ever need. Weighing 3 lbs, built with 7075 T6 billet aluminum side supports and replaceable bash plates, the Heavy Hitter Skid Plate withstands 6,000 lbs of impact force — the end-all protection solution for your E Ride Pro.

Refined through years of TKO hard enduro racing, the bash plate angles give the least slide resistance and reduce drag on rocks and logs — tested against plastic skid plates, the aluminum slides significantly easier because impacts don't embed into the plate. Two front bash plates are included for different-sized controllers, so you get a tight fit around your OEM or aftermarket controller and your phase wires stay protected. Unlike flexing plastic plates, there's no contact with the motor that can break motor mounts and housings.

TKO tested. GritShift approved. These plates survived the Red Bull Tennessee Knockout Hard Enduro — dozens of miles of rocky step-ups, big drops, log jumps, and rhythm obstacles — and were ready for more.

Features

• Weight: 3 lbs
• The most robust, over-engineered skid plate on the market for e-bikes
• 7075 T6 billet aluminum with a 10mm bash plate tested to withstand over 6,000 pounds of force
• Strategic ventilation slats keep your motor cool while ensuring maximum protection
• Dual front plates for a seamless fit with the majority of controllers
• Each section is easily removable for routine maintenance
• Replaceable bash plate can be exchanged in minutes
• Lifetime warranty (side rails only): if the side rails ever bend, they'll be replaced for FREE (not applicable to bash plates; replacements available upon request)

Fitment

• E Ride Pro S / SS / 2.0 / 3.0 / SR

Note: Use blue medium threadlocker on all hardware during installation. Mounting bolts are T20 Torx; recommended torque is 2.6 Nm / 1.92 ft-lb / 23 in-lb — barely hand-tight, but with threadlocker correctly applied it holds securely and stays removable. Factory variations, dealer options, and aftermarket modifications could affect compatibility — verify fitment before purchasing.

Download Tech Sheet (Assembly & Torque Specs)